1. Application

This standard for strong springs is designed for press mold. Its requirement and quality can be selected from the table below. And it also performs better with the general machinery.

 

2. Features

IK's springs with great strength are made of heterologous cross-sectional materials unlike usual round springs. And we succeeded in miniaturizing the mold. And also we are ready for mass production in order to meet our customers' demands.

 

3. Type

IK has 5 types of springs as below, which are easily distinguished by color.

Model

Description

Color

JF

Lightest Load

Yellow

JL

Light Load

Blue

JM

Medium Load

Red

JH

Heavy Load

Green

JB

Super Heavy Load

Brown

 

4. Materials

 

IK's powerful springs - JIS G3566, G3560, G3561, SWOSC-V   –   are especially effective against high stress, high-speed amplitude, and heat. Especially they have been used for car engine valves.

The standard of oil tempered wire is established by ASTM in USA, 1939. At this period the Swedish started to produce galpitan. In the case of Japan they began to make it in 1955 by adopting American technologies after they were defeated. In Korea KISWIRE(Goryo Steel) manufactured for the first time in 1995.

 

5. Manufacture

The main essence of IK's powerful springs are SWOCV-V ~ SWOSC-B. We manufacture our products through severe tests under strict process control (360 ~ 500 times per minute).

 

 

How to know of Strong Springs.

There are 4 points that you have to consider when choosing Strong Springs. 

1. Load – 400kg
2.Outer diameter – 50 ø
3. The number of uses – 1 million times
4 Compressed volume– 30m/m

Please refer to the table of load curves below. And please see the intersection point of vertical column ① Load 400kg, and horizontal column ② spring outer diameter, 50 ø. You can get the Red line, medium load.
Then, please see the medium load from the standard table below. It chooses JM50 x 125, in the case of ③ the number of uses, 1million times, and ④ compressed volume, 30m/m.

 

Model

Outer Dia.(mm)

Inner Dia.(mm)

Free Length(mm)

Spring Const (kef/mm)

1 million times

Deviation(mm)

Load(kg)

JM50 x 125

50

25

125

12.50

32.0

400

 

Type

Number of uses

1million times
(% of free length)

500,000 times
(% of free length)

300,000 times
(% of free length)

Max. compressed volume
(% of free length)

JF - Lightest Load

40.0%

45.0%

50.0%

Approx. 58.0%

JL - Light Load

32.0%

36.0%

40.0%

Approx. 48.0%

JM - Medium Load

25.6%

28.8%

32.4%

Approx. 38.0%

JH - Heavy Load

19.2%

21.6%

24.0%

Approx. 28.0%

JB - Super Heavy Load

16.0%

18.0%

20.0%

Approx. 24.0%

 

Correlation between the number of uses and compression rate

Outer Dia.

 Inner Dia.

Free length

 Load

 Turn direction

 Less than 50mm

More than 50mm

 + 0mm
- 0.7mm

 + 0.7mm
+ 0.1mm

 ± 0.5mm

  ±1%

± 10%

Right

Allowance of Strong Springs

 

 

Click on the image, go to a detail page.